Solar panels of solar road studs absorb sunlight during the day and turn the solar energy into electricity and stored in the storage devices.
green reflective studs for sale. Compared with the reflective road studs of ordinary colors, the green type will make drivers or pedestrians fell at ease.
The solar synchronized road studs refers to the solar road studs installed flickering in the same frequency, and work synchronized in the unity condition.
The reflective amber studs, which are also called cat eye reflective road studs, are made by two hemispheres with different diameters.
The solar road stud has rechargeable batteries inside and it can operate automatically, it uses the solar energy, which is economical.
If you are willing to going to Dubai, you can see the reflective road stud of NOKIN there. The road studs produced by NOKIN have been exported to many countries, including America, Canada
In the video, we can see the installation effect and working condition of the road markers of NOKIN.
Solar road studs can be divided into embedded type and raised type in accordance with different installation position.
The key problem of the road studs sold in the market has low shock resistance, and more than 80% products have this problem.
How to choose a suitable solar road stud, and what factors influence the stability of the solar road studs?
It is easy to install the road stud. If the glue is mixed with appropriate ratio, the reflective cat eye road stud can be used for 3 to 5 years.
So it is important to know what configuration of the solar street light you need, where to apply it, is it used frequently and your need toward the brightness and service time, before your purchasing.
When research the basic characteristics of any kind of solar road stud, the following aspects should be considered.
For the solar power generation is much more suitable for the lights, the solar street light, solar courtyard light and lawn light are widely applied nowadays.
Solar panels need to withstand the rolling and wear of wheels every day, if the strength is not enough, it is easy to wear, which would influence the conversion efficiency of solar panels.
Solar reflective road stud. Compared with the earlier solar road studs, the solar products produced nowadays make great breakthrough in illuminating pattern, outlooks, functions, etc.
How to Choose a High-quality Solar Road Stud? If the solar road stud is not sealed perfectly, the water will penetrate into them, which will cause short circuit, which will bring disastrous consequence, so a qualified solar road stud must ha
The road stud has a lot of classification. In accordance with the material can be divided into: cast aluminum road stud, plastic road stud,ceramic road stud,glass bead road stud.
In winter, the rain water will permeate into the road stud and frozen, which will cause larger gap of the shell, and then more water will permeate into the stud, which will influent the life span of solar road stud.
With the development of the city traffic, the solar road studs are installed in many cities, which improves the safety of drivers and pedestrians and beautifies the city.
It needs some time for the glue to consolidate to connect the road studs with the road surface closely after the installation of road studs.
The city council of Cambridge had launched a consultation to install the solar road studs in the footpath through Coe Fen.
Requirements on the solar panels and electronic circuit of solar road stud. The whole system of road stud may break down if any component goes wrong.
Compared with the traditional reflective road markers, the solar road stud can give drivers more than a thirty-second reaction window.
This article will introduce the choosing and installation methods of the solar street light.
The appearance of the solar street light provides convenience for the activities of people at night. And our country now pays more attention on the development and construction of the rural areas
After installation of road stud, there should be a period of time for curing the glue to make the road stud and ground bonded closely, four hours are recommended.
Generally speaking, the factors influence the service life of the solar street lights are mainly the light source, light source initiator, solar controller and the accumulator
After these three tests, it is easy to know that the solar road studs of our company perform perfect in water-proof.
The reflective studs save energy, which is environmentally friendly. They can not only serve for people’s daily life, but do no harm to the environment.
The solar road stud can also be applied in common roads, paths of countryside and other roads, which is widely used to reduce the traffic accidents cause by weather conditions or personal problems.
Never stop working hard! On November 11st, 2015, 8,000 pieces NK-1004 reflective road stud were purchased by our clients from the Republic of Congo. The road studs were favored by people of the Republic of Congo for long terms, and they all
A large number of solar road studs of NK-RS-A6-1 are just produced by NOKIN. The NK-RS-A6-1 is the hot sale product of NOKIN, which is one of the professional road stud suppliers in China.
Battery life is an important factor that decide the life of the solar road studs, thus the choice of the battery is very important.
The light given out by cars can be reflected by the leds of the road cat eyes to let the drivers know the front road condition.
Safe producing measures: 1. The whole set of safety facilities should be equipped, such as the safety signs, reflective safety clothing. 2. All the stuffs should go to work with certificates to ensure the safety and quality of the installat
Although the performance of active road stud is good, grooving, wire embedding and potting on the road should be made when installation with huge work quantity.
The raised pavement marker is a kind of aluminum road stud which can reduce traffic accidents at intersections of crossings of the road and give guidance and hazard warning at night or bad weathers. The solar panel on it absorbs sunlight in
In order to prevent arbitrary parking of vehicles, road studs are installed. After the removal of parking locks, these places become clean and tidy.
If the installation place of road stud is uneven, it will cause non-uniform load of road studs directly, and the press on the road studs will focus on the raised and sink parts of them.
The aluminum solar road marker is an environmentally friendly road facility which can delineate the road clearly from up to 800 meters away. It has strong impact resistance and abrasion resistance.
Install the road stud on the road for two years and observe the shell, the reflector surface and internal reflector once half a year and divide the observed result into five grades.
The solar reflective road stud can help the drivers keep away with the agglomerate fog. In some foreign countries, the solar reflective road studs are installed in expressways to warn the drivers about the way ahead to avoid the threat cause
The road studs, which are also called raised pavement markers, can be divided into several types: plastic road studs, cast aluminium road studs, and solar road studs. Wish this scenery line of the city can always be young and beautiful!
Active emission of solar road studs can not only prevent mist interference in the largest extent, but get rid of the dependence of the drivers on car lights with farther and better visual distance.
The road studs that are widely used nowadays can be classified into several types according to the materials, and they are cast aluminium road studs, PC road studs, porcelain road studs, and amber road studs.
The integrated solar street light can be used in various roads, auxiliary roads, paths of residential areas, courtyard, mine areas, parks, parking lots, where need night illumination.
The solar road stud of NK-RS-A6-1 is a new design and patent product of NOKIN TRAFFIC FACILITY. It can stand the pressure of 30 tons so that cars can drive on the solar led marker light directly.
The solar road studs are the alternatives of the traditional reflective road studs, which is also known as cat eyes, which has served on the roads for decades of years. The cat eyes are invented around 1930s by Yorkshireman, Percy Shaw, who
The reflective road stud of NK-1001 makes great improvements on main roads of Paraguay, and it makes the roads much brighter.
Copyright © 2011-2017 by NOKIN All Rights Reserved.